Establishment and pathophysiological evaluation of a novel model of acute compartment syndrome in rats.

BACKGROUND: Researches have used intra-compartmental infusion and ballon tourniquest to create high intra-compartmental pressure in animal models of Acute Compartment Syndrome (ACS). However, due to the large differences in the modeling methods and the evaluation criteria of ACS, further researches of its pathophysiology and pathogenesis are hindered. Currently, there is no ideal animal model for ACS and this study aimed to establish a reproducible, clinically relevant animal model. METHODS: Blunt trauma and fracture were caused by the free falling of weights (0.5 kg, 1 kg, 2 kg) from a height of 40 cm onto the lower legs of rats, and the application of pressures of 100 mmHg, 200 mmHg, 300 mmHg and 400 mmHg to the lower limbs of rats using a modified pressurizing device for 6 h. The intra-compartmental pressure (ICP) and the pressure change (ΔP) of rats with single and combined injury were continuously recorded, and the pathophysiology of the rats was assessed based on serum biochemistry, histological and hemodynamic changes. RESULTS: The ΔP caused by single injury method of different weights falling onto the lower leg did not meet the diagnosis criteria for ACS (< 30 mmHg). On the other hand, a combined injury method of a falling weight of 1.0 kg and the use of a pressurizing device with pressure of 300 mmHg or 400 mmHg for 6 h resulted in the desired ACS diagnosis criteria with a ΔP value of less than 30 mmHg. The serum analytes, histological damage score, and fibrosis level of the combined injury group were significantly increased compared with control group, while the blood flow was significantly decreased compared with control group. CONCLUSION: We successfully established a new preclinical ACS-like rat model, by the compression of the lower leg of rats with 300 mmHg pressure for 6 h and blunt trauma by 1.0 kg weight falling.

Specifying the Starting Point for S1 Iliosacral Screw Placement in the Dysmorphic Sacrum.

BACKGROUND: Sacral dysmorphism is not uncommon and complicates S1 iliosacral screw placement partially because of the difficulty of determining the starting point accurately on the sacral lateral view. We propose a method of specifying the starting point. METHODS: The starting point for the S1 iliosacral screw into the dysmorphic sacrum was specifically set at a point where the ossification of the S1/S2 intervertebral disc (OSID) intersected the posterior vertebral cortical line (PVCL) on the sacral lateral view, followed by guidewire manipulation and screw placement on the pelvic outlet and inlet views. Computer-simulated virtual surgical procedures based on pelvic computed tomography (CT) data on 95 dysmorphic sacra were performed to determine whether the starting point was below the iliac cortical density (ICD) and in the S1 oblique osseous corridor and to evaluate the accuracy of screw placement (with 1 screw being used, in the left hemipelvis). Surgical procedures on 17 patients were performed to verify the visibility of the OSID and PVCL, to check the location of the starting point relative to the ICD, and to validate the screw placement safety as demonstrated with postoperative CT scans. RESULTS: In the virtual surgical procedures, the starting point was consistently below the ICD and in the oblique osseous corridor in all patients and all screws were Grade 1. In the clinical surgical procedures, the OSID and PVCL were consistently visible and the starting point was always below the ICD in all patients; overall, 21 S1 iliosacral screws were placed in these 17 patients without malpositioning or iatrogenic injury. CONCLUSIONS: On the lateral view of the dysmorphic sacrum, the OSID and PVCL are visible and intersect at a point that is consistently below the ICD and in the oblique osseous corridor, and thus they can be used to identify the starting point. LEVEL OF EVIDENCE: Therapeutic Level III . See Instructions for Authors for a complete description of levels of evidence.

Development and validation of a nomogram for predicting deep venous thrombosis in patients with pelvic and acetabular fractures: a retrospective cohort study : Predictive model for pelvic/acetabular fractures.

PURPOSE: To construct a novel nomogram model that can predict DVT and avoid unnecessary examination. METHODS: Patients admitted to the hospital with pelvis/acetabular fractures were included between July 2014 and July 2018. The potential predictors associated with DVT were analyzed using Univariate and multivariable logistic regression analysis. The predictive nomogram was constructed and internally validated. RESULTS: 230 patients were finally enrolled. There were 149 individuals in the non-DVT group and 81 in the DVT group. Following analysis, we obtained the final nomogram model. The risk factors included age (OR, 1.037; 95% CI, 1.013-1.062; P = 0.002), body mass index (BMI) (OR, 1.253; 95% CI, 1.120-1.403; P < 0.001); instant application of anticoagulant after admission (IAA) (OR, 2.734; 95% CI, 0.847-8.829; P = 0.093), hemoglobin (HGB) (OR, 0.970; 95% CI, 0.954-0.986; P < 0.001), D-Dimer(OR, 1.154; 95% CI, 1.016-1.310; P = 0.027) and fibrinogen (FIB) (OR, 1.286; 95% CI, 1.024-1.616; P = 0.002). The apparent C-statistic was 0.811, and the adjusted C-statistic was 0.777 after internal validations, demonstrating good discrimination. Hosmer and Lemeshow's goodness of fit (GOF) test of the predictive model showed a good calibration for the probability of prediction and observation (χ2 = 3.285, P = 0.915; P > 0.05). The decision curve analysis (DCA) and Clinical impact plot (CIC) demonstrated superior clinical use of the nomogram. CONCLUSIONS: An easy-to-calculate nomogram model for predicting DVT in patients with pelvic-acetabular fractures were developed. It could help clinicians to reduce DVT and avoid unnecessary examinations.

A new classification for quadrilateral plate fracture of acetabulum.

BACKGROUND: Recently, quadrilateral plate (QLP) fractures of acetabulum have attracted increasing attention. However, evidence for the appropriate classification of QLP fractures is still lacking, making it difficult to understand and manage these fractures. This study aimed to introduce a new classification for QLP fractures and evaluate its reproducibility. METHODS: A series of 1101 consecutive patients with acetabular fractures from 8 level-I trauma centers were enrolled in this study. All patients underwent preoperative radiograph and computed tomography imaging. QLP fractures were identified and classified using the new and Judet-Letournel classification system. The inter- and intra-observer reliabilities (kappa coefficients, κ) of these two systems were investigated by 4 observers. Furthermore, surgical approaches and fixation methods for each fracture type are described. RESULTS: In total, 243 (243/1101, 22%) patients with QLP fractures were identified and included in this analysis. The mean κ value of the intra-observer reliability was 0.84 (range, 0.763-0.919) for the new classification, indicating excellent agreement, and the inter-observer reliability was 0.762 (range, 0.625-0.876), indicating substantial agreement. The values were 0.649 (range, 0.523-0.708) and 0.584 (0.497-0.646), respectively, according to the Judet-Letournel classification. Six cases (6/243, 2.5%) could not be classified using the Judet-Letournel classification. The selection of surgical approaches and fixation methods depends on the fracture type; however, an anterior intra-pelvic approach and buttressing fixation using the plate or screw are preferred for QLP fractures. CONCLUSION: This study presents a new classification for QLP fractures, showing higher intra- and inter-observer reliabilities than those obtained using the Judet-Letournel classification. This allowed us to obtain an in-depth and comprehensive understanding of QLP fractures. Additionally, the new classification might guide further studies on surgical strategies for QLP fractures. LEVEL OF EVIDENCE: Level II.

Chronic intermittent hypobaric hypoxia ameliorates osteoporosis after spinal cord injury through balancing osteoblast and osteoclast activities in rats.

Introduction: As a common complication of spinal cord injury (SCI), most SCI patients suffer from osteoporosis. In our previous study, chronic intermittent hypobaric hypoxia (CIHH) could promote bone fracture healing. We speculated that it may act a role in the progression of osteoporosis. The current study purposed to explore the role of CIHH in the osteoporosis triggered by SCI in rats. Methods: A SCI-induced SCI model was established by completed transection at T9-T10 spinal cord of Wistar rats. One week after SCI, the rats were conducted to CIHH treatment (PB = 404 mmHg, Po2 = 84 mmHg) 6 hours a day for continuously 7 weeks. Results: The results of X-radiography and Micro-CT assessment demonstrated that compared with sham rats, the areal bone mineral density (BMD), bone volume to tissue volume, volumetric BMD, trabecular thickness, trabecular number, and trabecular connectivity were decreased. Trabecular bone pattern factor, trabecular separation, as well as structure model index were increased at the distal femur and proximal tibia of SCI rats, which were effectively reversed by CIHH treatment. Histomorphometry showed that CIHH treatment increased bone formation of SCI rats, as evidenced by the increased osteoid formation, the decreased number and surface of TRAP-positive osteoclasts. Furthermore, ELISA and real time PCR results showed that the osteoblastogenesis-related biomarkers, such as procollagen type 1 N-terminal propeptide, osteocalcin in serum, as well as ALP and OPG mRNAs in bone tissue were decreased, while the osteoclastogenesis-related biomarkers, including scleorostin in serum and RANKL and TRAP mRNAs in bone tissue were increased in SCI rats. Importantly, the deviations of aforementioned biomarkers were improved by CIHH treatment. Mechanically, the protective effects of CIHH might be at least partly mediated by hypoxia-inducible factor-1 alpha (HIF-1α) signaling pathway. Conclusion: The present study testified that CIHH treatment ameliorates osteoporosis after SCI by balancing osteoblast and osteoclast activities in rats.

Comparison of surgical efficacy of locking plates and interlocking intramedullary nails in the treatment of proximal humerus fractures.

BACKGROUND: The objective of this study was to evaluate the efficacy of locking plates versus interlocking intramedullary nails in the treatment of proximal humerus fractures to provide clinical data support and theoretical guidance. METHODS: Patients with proximal humerus fracture from the Third hospital of Shijiazhuang city and Third hospital of Hebei medical university and from January 2017 to June 2019 were selected, included and divided into the locking plate group and the interlocking intramedullary nail group according to the intervention received. Information pertaining to the perioperative period (operation time, hospital stay, blood loss, etc.) of patients in both groups was collected. VAS pain scores, shoulder activity Constant-Murley scores and postoperative complications were documented. The perioperative data of the two groups were compared, and P < 0.05 was considered statistically significant. RESULTS: A total of 64 patients were enrolled, including 36 patients in the locking plate group, with a mean age of 61.3 ± 13.9 years, while the mean age of the interlocking intramedullary nail group was 65.6 ± 11.2 years. There was no statistical difference in gender, affected side, injury mechanism and Neer classification between the two groups (P > 0.05). However, the average operation time of the locking plate group was shorter than that of the interlocking nail group (84.9 ± 11.7 vs. 102.6 ± 22.1 min, P = 0.00), and the intraoperative blood loss of the locking plate group (137.4 ± 16.8 ml) was higher than that of the interlocking nail group (72.5 ± 10.5 ml, P = 0.00). There was no significant difference in the VAS score and Constant-Murley score between these two groups at the final follow-up. CONCLUSION: Interlocking intramedullary nails are more minimally invasive than locking plates, but fracture reduction and fixation take longer. There was no significant difference in pain and shoulder function scores between the two internal fixation strategies for the treatment of proximal humerus fracture.

Displacement Pattern of Anterior and Posterior Column Fragments in Both-Column Acetabular Fractures: A 3D Reconstruction-Based Study.

Background: Few studies have been conducted to examine the displacement characteristics of both-column acetabular fractures (BCAFs). The goal of this study was to investigate the displacement pattern of anterior column (AC) and posterior column (PC) fragments in BCAFs using 3D virtual software. Materials and Methods: BCAFs were retrospectively reviewed, and 81 patients were enrolled. Computed tomography (CT) images were imported into Mimics software. A 3D model of each pelvis was generated. Four marked points and the rotation angle of each of the injured ACs and PCs were identified. The fracture fragments were reduced virtually using the software, and the change in coordinates of the marked points after reduction was recorded while the rotation angle was measured. The measurements of positional and directional displacement were analysed using the Mann-Whitney U test and the binomial test, respectively. Results: There was a propensity for AC fragments to shift superomedially and to rotate externally (p < 0.001). Additionally, the posteroinferior fracture area of AC fragments showed the greatest displacement (p < 0.05). PC fragments moved superomedially (p < 0.001) and moved more at the proximal end than the distal end (p < 0.001). PC displacement was always accompanied by internal rotation (p < 0.001). Greater AC displacement was observed in the fracture area further away from the acetabulum (p < 0.05). Greater rotation was observed for the AC than the PC (p < 0.001). Conclusion: After a BCAF occurs, there are regular patterns regarding the direction and distance of AC and PC fragment displacement. Information on these patterns may provide insight into the injury mechanism and fracture morphology and facilitate surgical decision-making for orthopaedic trauma surgeons.

Three-dimensional mapping study of pure transverse acetabular fractures.

BACKGROUND: To describe and analyze the morphological characteristics, location and frequency of pure transverse acetabular fracture lines through fracture mapping and quantitative measurements. METHODS: Transverse fractures were retrospectively reviewed and analyzed. All computed tomography (CT) data were used for reconstruction and manual reduction. The reductive fracture fragments were graphically overlaid onto a three-dimensional (3D) right hemipelvis template. Then, the fracture lines were accurately depicted onto the surface of the 3D template. The fracture lines were overlapped onto the model to create the 3D fracture map and heatmap. All cases were subdivided into infratectal (62-B1.1), juxtatectal (62-B1.2), and transtectal (62-B1.3) types based on the AO Foundation/Orthopedic Trauma Association (AO/OTA) classification. Some anatomic parameters of the transverse fractures were also analyzed in these 3 groups. RESULTS: Our study included forty-nine transverse fractures from 32 male and 17 female patients (mean age, 42 years; range 21-74 years) and included 19 type 62-B1.1, 17 type 62-B1.2, and 13 type 62-B1.3 fractures. The average anterior rim fracture angle was 70.0° (± 11.6°), and the posterior rim fracture angle was 92.4° (± 28.5°). The anterior rim fracture angles in 40 cases (40/49, 81.6%) fell within a wide range between 63° and 80°. On the heatmap, the hot zones were located on the highest position of the cotyloid fossa and the narrowed region, and the cold zone was on the inferior third of the articular surface. For type 62-B1.3 fractures, the hot zone was located on the posterior of the acetabular dome. There were no significant differences in anterior rim fracture angle and anterior height among the three patterns (P = 0.071, P = 0.072). Post hoc tests of the posterior rim fracture angle and the posterior height revealed significant differences among fracture subtypes (P < 0.01). The posterior intra-articular fracture line was significantly longer than the anterior intra-articular fracture line in type 62-B1.1 and type 62-B1.2 fractures (P < 0.01). CONCLUSION: The fracture lines of transverse fractures through the anterior rim were concentrated on the narrowed zone, and the posterior fracture lines were diffusely distributed. The intra-articular fracture line distribution was focused on the superior and middle thirds of the joint surface. The recurrent fracture lines involving the weight-bearing dome mainly converged on the posterior region of the roof.

Morphological Characteristics of the Posterior Wall Associated with Complex Acetabular Fractures: A Radiological Study Using 3D Software and Fracture Mapping Technique.

Background: The aim of the study was to compare the morphological distinctions of the posterior wall (PW) in different complex acetabular fractures using 3D software and fracture mapping technique and ultimately to provide for improved clinical treatment. Methods: One hundred and fourteen patients with complex acetabular fracture associated with PW were recruited. All patients were divided into two groups according to the injury mechanism of the PW: Group A (both-column and PW) and Group B (including posterior column and PW; T shape and PW; and transverse and PW). Fracture mapping was generated on the intra- and extrasurface of a standard template. The radiological parameters including spatial displacement, articular surface area, articular range, marginal impaction, and multifragments of the two groups were compared. Results: The spatial displacement, intra-/extra-articular surface area, and start and end point in Group A were 10.9 mm (IQR, 8.4-15.2), 8.2 ± 2.6 cm2, 17.9 ± 5.3 cm2, 0.8° (IQR, -6.0-16.2), and 107.5° (IQR, 97.2-116.9), respectively. The results in Group B were 30.4 mm (IQR, 16.8-48.7), 4.1 ± 2.0 cm2, 10.6 ± 4.4 cm2, 29.5° (IQR, 19.2-38.0), and 117.5° (IQR, 98.2-127.2), respectively. Marginal impaction was defined by Letournel et al. All the differences between two groups were significant (P < 0.05). The fracture map in Group A showed an "L"-shaped pattern and a "cusp" on the ilium, and the PW was located at 1/5 to 1/4 of the posterosuperior part of the acetabulum. The fracture maps in Group B were scattered and lacked consistency, and the PWs were confined to 1/10 to 1/8 of the posterior acetabulum. Conclusions: Quantitative measurements and fracture mapping represented the differences in morphological characteristics of PWs associated with complex acetabular fractures.

Risk factors for preoperative deep venous thrombosis in hip fracture patients: a meta-analysis.

STUDY DESIGN: A meta-analysis. BACKGROUND: Hip fracture (HF), as common geriatric fracture, is related to increased disability and mortality. Preoperative deep vein thrombosis (DVT) is one of the most common complications in patients with hip fractures, affecting 8-34.9% of hip fracture patients. The study aimed to assess the risk factors of preoperative DVT after hip fractures by meta-analysis. METHODS: An extensive search of the literature was performed in the English databases of PubMed, Embase, and the Cochrane Library; and the Chinese databases of CNKI and WAN FANG. We collected possible predictors of preoperative DVT from included studies, and data analysis was conducted with RevMan 5.3 and STATA 12.0. RESULTS: A total of 26 English articles were included, and the rate of DVT was 16.6% (1627 of 9823 patients) in our study. Our findings showed that advanced age [p = 0.0003, OR = 0.13 95% CI (0.06, 0.21)], female patients [p = 0.0009, OR = 0.82 95% CI (0.72, 0.92)], high-energy injury [p = 0.009, OR = 0.58 95% CI (0.38, 0.87)], prolonged time from injury to admission [p < 0.00001, OR = 0.54 95% CI (0.44, 0.65)], prolonged time from injury to surgery [p < 0.00001, OR = 2.06, 95% CI (1.40, 2.72)], hemoglobin [p < 0.00001, OR = - 0.32 95% CI (- 0.43, - 0.21)], coronary heart disease [p = 0.006, OR = 1.25 95% CI (1.07, 1.47)], dementia [p = 0.02, OR = 1.72 95% CI (1.1, 2.67)], liver and kidney diseases [p = 0.02, OR = 1.91 95% CI (1.12, 3.25)], pulmonary disease [p = 0.02, OR = 1.55 95% CI (1.07, 2.23)], smoking [p = 0.007, OR = 1.45 95% CI (1.11, 1.89)], fibrinogen [p = 0.0005, OR = 0.20 95% CI (0.09, 0.32)], anti-platelet drug [p = 0.01, OR = 0.51 95% CI (0.30, 0.85)], C-reactive protein [p = 0.02, OR = 5.95 95% CI (1.04, 10.85)], < 35 g/l albumin [p = 0.006, OR = 1.42 95% CI (1.1, 1.82)], and thrombosis history [p < 0.00001, OR = 5.28 95% CI (2.85, 9.78)] were risk factors for preoperative DVT. CONCLUSIONS: Many factors, including advanced age, female patients, high-energy injury, prolonged time from injury to admission, prolonged time from injury to surgery, patients with a history of coronary heart disease, dementia, liver and kidney diseases, pulmonary disease, smoking, and thrombosis, fibrinogen, C-reactive protein, and < 35 g/l albumin, were found to be associated with preoperative DVT. Our findings suggested that the patient with above characteristics might have preoperative DVT. LEVEL OF EVIDENCE: Level III.

An exploratory study of pelvis anatomy to revise the bony canal used for LC2 screw insertion.

BACKGROUND: Percutaneous screw placement, especially the insertion of LC2 screws, is technically demanding. Although the traditional LC2 bony canal spans the anterior inferior iliac spine (AIIS) to the posterior superior iliac spines (PSIS), a high perforation rate has been reported. OBJECTION: The aim of this research was to design a revised bony canal, measure the canal width and length and guide the insertion of LC2 screws for pelvic fractures. MATERIALS AND METHODS: The plane tool in the Mimics analysis menu was used to draw a midplane connecting the midpoint between the anterior inferior spine and the PSIS upper flat region with pelvic CT data. The minimum widths of the upper, middle, lower surfaces of the tunnel and perforation rate were measured and compared. The ideal screw length was also measured along the longitudinal axis running through the midpoint of the midplane. RESULTS: The minimum widths of the upper, middle and lower surfaces of the revised canal were 3.63 mm, 7.7 mm, and 11.93 mm, respectively, in males and 5.97 mm, 9.93 mm, and 12.45 mm, respectively, in females. Significant differences were observed among the upper, middle and lower surfaces of the revised canal in male patients (P < 0.001). In female subjects, the upper canal surface was significantly different from the middle and lower canal surfaces (P < 0.001). The perforation rate was significantly decreased especially in females pelvic. The channel length passing through the midpoint of the narrowest position of the pelvis was 130.85 ± 8.02 mm in males and 124.30 ± 7.71 mm in females and was significantly different for male and female pelvises (P = 0.004). CONCLUSION: The LC2 screw should be inserted along the intersection line of the AIIS lateral wall and the iliac body. The screw should be inserted under the line between the midpoint of the AIIS and the PSIS upper flat region to ensure accuracy of placement. LC2 screws can be more easily inserted in males than in females, and the rate of cortical perforation can be significantly decreased under the guidance of the newly proposed canal.

Is Plating Fixation Through the Kocher-Langenbeck Approach for Associated Posterior Wall Fragment Indispensable in Both-Column Acetabular Fractures?

OBJECTIVE: The treatment methods for posterior wall (PW) in both-column acetabular fractures are controversial. The purpose of this study was to compare reduction quality, clinical outcomes, and complications of nonfixation for posterior wall fragment and plating via the Kocher-Langenbeck (KL) approach after anterior surgical procedures in both-column acetabular fractures. METHODS: Forty-nine patients with both-column acetabular fractures associated with PW fixed via iliac fossa and Stoppa approaches from October 2012 to October 2017 were recruited into this study and were divided into two groups: Nonfix group (nonfixation for PW) and KL group (PW plating through the KL approach). Operation duration, intraoperative blood loss, reduction quality, fracture healing, and relevant complications of patients were reviewed. Merle d'Aubigné scores were used for assessing functional outcome. RESULTS: The mean blood loss and operation durations were lower in Nonfix group than in KL group (both p < 0.05). The mean hospital stay durations were (18.54 ± 6.42) days and (21.17 ± 7.32) days in groups Nonfix and KL, respectively (p = 0.186). All fractures healed well with no significant difference in union time between the two groups (p = 0.210). The rates of satisfactory reduction were 84.62% (22/26) in Nonfix group and 86.96% (20/23) in KL group (p = 1.000). The mean Merle d'Aubigné scores were 15.62 ± 2.28 in Nonfix group and 16.17 ± 2.19 in KL group (p = 0.388). The complication rates were 7.69% (2/26) in Nonfix group and 34.78% (8/23) in KL group (p = 0.046). CONCLUSIONS: For both-column acetabular fractures associated with PW fragment, although fixation of PW was not performed after anterior surgical procedures, satisfactory outcomes could also be obtained. However, nonfixation was a less invasive choice with a lower complication rate.

Association between sleep duration and quality with rapid kidney function decline and development of chronic kidney diseases in adults with normal kidney function: The China health and retirement longitudinal study.

Research have shown that sleep is associated with renal function. However, the potential effects of sleep duration or quality on kidney function in middle-aged and older Chinese adults with normal kidney function has rarely been studied. Our study aimed to investigate the association of sleep and kidney function in middle-aged and older Chinese adults. Four thousand and eighty six participants with an eGFR ≥60 ml/min/1.73 m2 at baseline were enrolled between 2011 and 2015 from the China Health and Retirement Longitudinal Study. Survey questionnaire data were collected from conducted interviews in the 2011. The eGFR was estimated from serum creatinine and/or cystatin C using the Chronic Kidney Disease Epidemiology Collaboration equations (CKD-EPI). The primary outcome was defined as rapid kidney function decline. Secondary outcome was defined as rapid kidney function decline with clinical eGFR of <60 ml/min/1.73 m2 at the exit visit. The associations between sleep duration, sleep quality and renal function decline or chronic kidney disease (CKD) were assessed based with logistic regression model. Our results showed that 244 (6.0%) participants developed rapid decline in kidney function, while 102 (2.5%) developed CKD. In addition, participants who had 3-7 days of poor sleep quality per week had higher risks of CKD development (OR 1.86, 95% CI 1.24-2.80). However, compared with those who had 6-8 h of night-time sleep, no significantly higher risks of rapid decline in kidney function was found among those who had <6 h or >8 h of night time sleep after adjustments for demographic, clinical, or psychosocial covariates. Furthermore, daytime nap did not present significant risk in both rapid eGFR decline or CKD development. In conclusion, sleep quality was significantly associated with the development of CKD in middle-aged and older Chinese adults with normal kidney function.

Fracture Mapping of Both-Column Acetabular Fractures.

OBJECTIVES: To characterize the location and frequency of the fracture lines and comminution zones of both-column fractures using fracture mapping. METHODS: Both-column fractures were retrospectively reviewed in 4 Level 1 trauma centers. Mimics software was used to reconstruct the both-column fractures and simulate the fracture reduction. Then, the fracture lines and the intra-articular and extra-articular comminution zones were drawn on a 3-dimensional innominate bone template. The distribution of fracture lines and fracture fragments were also mapped on the two-dimensional template of the acetabulum. All the included patients were divided into low-variety group and high-variety group according to the anterior column fracture line above or below the anterior superior spine. The anatomical characteristics of the posterior wall fragment were also analyzed in these 2 groups. RESULTS: Seventy-eight patients with both-column fracture were included. The T type or inverted Y type main fracture lines divided the innominate bone into low-variety (n = 11) and high-variety (n = 67) both-column fractures. The extra-articular comminution zones are usually distributed between the posterior iliac fragment and anterior column fragment. High-variety type both-column fractures are usually combined with high and sharp posterior wall fragments, whereas low-variety type both-column fractures are usually accompanied by low and flat posterior wall fragments. The comminution zones in the acetabulum are mostly concentrated in the anterior and inferior parts of the acetabulum. CONCLUSIONS: The innominate bone is divided into 3 major parts in the both-column fracture, and the fracture center is located at the proximal of the acetabular dome. The both-column fractures are divided into low-variety and high-variety patterns. The location of the anterior column fracture determined the characteristics of the posterior wall fragment.

Role of the Lumbosacral Transition Vertebra and Vertebral Lamina in the Pathogenesis of Lumbar Disc Herniation.

OBJECTIVE: To investigate the prevalence of lumbosacral transition vertebrae (LSTVs) in both the normal population and the lumbar disc herniation (LDH) population and to determine the risk factors for LDH. METHODS: Between January 2019 and September 2020, all patients aged 18-39 years and underwent an anteroposterior (AP) X-ray of the lumbar vertebrae were retrospective reviewed in our institution. Those patients who were diagnosed with LDH were eligible for inclusion in the LDH group. During the same period, those patients admitted to our hospital who underwent an anteroposterior X-ray of the lumbar spine and had not been diagnosed with LDH were included in the control group. Those patients with disease that might affect the lumbar anatomy were excluded from both groups. The type of LSTV was classified according to the Castellvi classification. The height of the lumbar vertebral lamina was evaluated through the h/H index. The inter- and intra-observer reliability was evaluated by one senior radiologist and one senior orthopedist using intraclass correlation coefficient (ICC). The association between the LSTV and the herniation level was also investigated. Binary logistic regression was used to explore the association of different factors between the LDH group and the control group. RESULTS: Two hundred LDH patients (115 male and 85 female) and 200 individuals (108 male and 92 female) were investigated retrospectively. The prevalence of LSTVs was 71.5% (n = 143) in the LDH group and 34.0% (n = 68) in the control group. The most frequent LSTV types were type Ib and type IIa. The inter- and intra-observer ICCs of the measurement of "h/H" index and the classification of LSTV were all "excellent" (ICC > 0.90). The median h/H index in the control group was significantly higher than that in the LDH group (0.28 (0.26, 0.31) vs 0.34 (0.31, 0.37), P = 0.000). The distribution of the Castellvi classification in the L4/5 and L5/S1 herniation patients was significantly different (P = 0.048). LSTVs, BMI and the h/H index were closely associated with LDH, with odds ratios of 3.06 (95% CI: 2.12-4.43), 1.23 (95% CI: 1.13-1.33) and 0.09 (95% CI: 0.05-0.15), respectively. The incidence of L4/5 disc herniation in patients with an LSTV was significantly more common than that in patients with L5/S1 disc herniation (P = 0.048). CONCLUSION: The prevalence of LSTVs was 34.0% in the control group and 71.5% in the LDH group; LSTVs and BMI were positively correlated with LDH, and h/H was negatively correlated with LDH.

Outcome Analysis of Intramedullary Nailing Augmented with Poller Screws for Treating Difficult Reduction Fractures of Femur and Tibia: a Retrospective Cohort Study.

PURPOSE: Poller screws may serve as an adjunctive reduction tool and aid fracture reduction while augmented with intramedullary (IM) nailing for treating diaphyseal or metaphyseal fractures of the femur and tibia. However, there is no consistent conclusion about whether the method of using IM nailing augmented with poller screws is more advantageous than using IM nailing alone. METHODS: A total of 96 patients who received IM nailing with or without supportive poller screw for treating long-bone fractures in lower limbs and who experienced difficulties in performing reduction or IM insertion during the surgical process were included in this retrospective cohort study (33 patients with poller screws in group A versus 63 patients without poller screws in group B). Patient demographics including age, gender, and body mass index; injury-related data including fracture location, classification, and injury mechanism; operation-related data including American Society of Anesthesiologists, duration of operation, poller screw time, method of anesthesia, and volume of intraoperative hemorrhage; outcomes including fracture healing time; and incidence of outcomes of nonunion, malunion, infection, and secondary surgical procedures were evaluated. RESULTS: Fracture healing time of patients in group A was significantly shorter than that of group B (18.3 ± 4.8 weeks versus 24.3 ± 3.0 weeks, p = 0.023). Union rate was higher (100.0% versus 87.3%, p = 0.048), and malunion rate and secondary surgical procedure rate were lower (both are 3.0% versus 19.0%, p = 0.031) in group A than that of group B. CONCLUSION: Poller screw augmentation of IM nailing is a favourable option to shorten fracture healing time and to reduce complication rates in terms of nonunion, malunion, and secondary surgical procedure in the treatment of both diaphyseal/metaphyseal fractures of the femur or tibia while compare with those treated by IM nailing alone.

Open-Wedge HTO with Absorbable ß-TCP/PLGA Spacer Implantation and Proximal Fibular Osteotomy for Medial Compartmental Knee Osteoarthritis: New Technique Presentation.

PURPOSE: The purpose of this study was to present a new absorbable spacer for medial compartmental knee osteoarthritis (OA). The functional and radiographic results of patients treated with the novel surgical technique were also evaluated to investigate its clinical feasibility. METHODS: Patients with medial compartmental knee OA who underwent open-wedge high tibial osteotomy (HTO) with absorbable ß-TCP/PLGA [30% beta-tricalcium phosphate and 70% poly (lactic-co-glycolic acid)] spacer implantation and proximal fibular osteotomy from January 2016 to February 2017 were retrospectively analyzed. The operation time, blood loss, and relevant complications were reviewed. The femorotibial angle (FTA), varus angle (VA), joint line convergence angle (JLCA), American Knee Society Score (KSS), and visual analog scale (VAS) score were recorded preoperatively and at the final follow-up, respectively. RESULTS: At the final follow-up, the mean FTA and JLCA were 179.85° ± 4.34° and 2.44° ± 1.26°, respectively, which were smaller than the preoperative values (182.94° ± 3.86° and 4.12° ± 1.65°, respectively; both p < 0.001). The final VA and VAS score were lower than those measured preoperatively (both p < 0.001). The clinical and functional KSSs at the final follow-up were higher than the preoperative scores (p < 0.001). CONCLUSIONS: This novel absorbable spacer could provide adequate stability for the tibial osteotomy gap, at a lower cost than a traditional plate. With the use of this spacer as an osteoinductive and biodegradable device, secondary surgery for fixation removal could be avoided. The novel surgical technique could improve both the radiographic appearance and the function of the knee in patients with knee OA.

Treatment of Unstable Intertrochanteric Fractures with Proximal Femoral Nailing Antirotation: Traction Table or Double Reverse Traction Repositor.

ObjectiveThe objective of this retrospective study was to compare the efficacy of the double reverse traction repositor (DRTR) and traction table with proximal femoral nailing antirotation (PFNA) in the treatment of unstable intertrochanteric fractures. Patients and Methods: Data from 66 patients (36 patients treated with the traction table and 30 patients treated with DRTR) with unstable intertrochanteric fractures were reviewed from January 2017 to June 2017. The demographics, fracture characteristics, surgical data, and prognostic parameters were collected to compare the differences between the two groups. Results: The collodiaphyseal angle (CDA) was significantly lower in the DRTR group than in the traction table group (129.37° ± 7.47 and 135.67° ± 6.95, respectively, p < 0.001). The open reduction rate was significantly lower in the DRTR group than in the traction table group (3.3% and 13.9%, respectively, p < 0.001). No significant differences were found in the demographics, fracture characteristics, other surgical data, or prognostic parameters between the two groups. Conclusions: DRTR can facilitate safe, effective, and minimally invasive treatment of unstable intertrochanteric fractures with PFNA.

Silica-Coated, Waxberry-like Surface-Enhanced Raman Resonant Scattering Tag-Pair with Near-Infrared Raman Dye Encoding: Toward In Vivo Duplexing Detection.

Surface-enhanced Raman resonant scattering (SERRS) tags encoded with near-infrared (NIR) Raman reporters showed great potential for in vivo detection owing to their ultrasensitivity. However, in vivo signal stability of such tags is a remaining problem due to the lack of suitable silica coating method because the weakly adsorbed NIR reporters tend to detach from traditional gold nanosubstrates in the ethanol-rich and high pH conditions, which are commonly used for silica coating. Herein, we propose a silica coating method for NIR SERRS tags by using waxberry-like gold nanoparticles (NPs) as substrates. The lipid bilayer of the NPs played a crucial role in the coating, which can encapsulate the NIR Raman reporter via hydrophobic interactions and prevent the interference from a harsh medium. Thus, the silica-coated tags well preserved ultrasensitivity of bare tags and simultaneously gained satisfactory signal stability in vivo. Moreover, the coating method is compatible for the encapsulation of a variety of thiol group-free NIR reporters (as exemplified by DTTC, Cy7, IR792, and DIR), relying on which a tag-pair with distinguishable peaks can be screened (labeling with DTTC and Cy7, respectively). In vivo duplexing detection revealed that the tag-pair-labeled liposome was cleared faster in the liver than polydopamine NPs within one mouse. The developed method paves an easy way for gaining high-quality SERRS tags and will promote their in vivo multiplex analysis and diagnostics applications.

Neutrophil to lymphocyte ratio and fracture severity in young and middle-aged patients with tibial plateau fractures.

PURPOSE: The neutrophil-to-lymphocyte ratio (NLR) has recently been found to be closely associated with the severity of trauma. This study aimed to analyze the correlation between the imaging severity of isolated tibial plateau fractures (TPFs) and the NLR in the blood. METHODS: A total of 223 patients with isolated TPFs were enrolled in this retrospective study over five years. The data at hospital admission were extracted from an electronic database. Schatzker classification was performed according to the imaging data by two experienced orthopaedic surgeons. All patients were divided into two groups: group 1 included patients with mild-to-moderate fractures (Schatzker types I-IV), and group 2 included patients with severe fractures (Schatzker types V-VI). The NLR levels at hospital admission were statistically compared between the two groups. RESULTS: The blood NLR, hemoglobin level, red blood cell count, neutrophil count, platelet count, time from injury to admission, total protein, and Na+ levels were significantly different among the two groups. According to the receiver operating characteristic (ROC) curve, the cutoff for the NLR was 5.8. ROC curve analysis showed that the sensitivity of an NLR ≥ 5.8 to predict severe TPFs was 53.4%, and the specificity was 70.7%. In the multivariate analysis, NLR ≥ 5.8 and haemoglobin < lower limit appeared to be independent predictors of severe TPFs. CONCLUSIONS: Our study is the first to demonstrate that the NLR level appears to be a useful biomarker for predicting the severity of isolated TPFs in young and middle-aged adults.